Bulova Freeze dryer 02

Laboratory sublimation dryer Bulova 02 intended for small laboratories and household use.

The maximum weight of the loaded product 2 kg/cycle
Area of ​​trays: 1776 cm²
Volume of trays: 2131 cm³Working depth of vacuum 15-180 by
The temperature on the surface of the sublimator, max. minus -40°
Shelf temperature, max. + 60С°
Mass of accumulating ice 1,86 kg/cycle.
The number of shelves for raw materials - 3
Technological cycle time 24-48 hours
Power of all devices and units 1,3 kW/year., installed: 2.0 kW/year.
Supply voltage 220-230 volts with ground
Mass is no more 70 kg
Operating temperature 10° - 30°C
Maximum noise level 75 dB
Freon R-410a

Frame consists of several panels, from which the front and back walls are formed, cover and base. Made of thick sheet metal 0.8-1 mm and painted by the method of powder painting. The panels are connected to each other using screws
The Bulova 02A dryer is made of ASCI-304 stainless sheet metal..

Drying chamber is a hollow cylinder made of food grade stainless steel ASCI-304, equipped with organic glass front doors. A silicone seamless ring acts as a sealing element. A handle with a latch is installed on the door. Necessary nozzles and fasteners are welded to the cylinder.

Vacuum pump is an integral part, equipped with two 2-stage plate-rotor pumps. Works under absolute pressure 15 by.

Refrigeration unit consists of a low-temperature compressor , of the evaporating part, devices, that ensure their operation and regulation.

Connecting and closing fittings – standard, used for vacuum devices.

Management controller – electronic device with microprocessor control, color 7" display and software. Allows you to maintain the desired drying parameters and drying modes, control of the dryer.

Shelves is a 4-tier structure made of flat elements, made of food grade aluminum, to the lower part of which an electric heater is attached. On the surface of which trays with the product are installed, that dries. Heat from the shelves is transferred to the product by conduction and thermoradiation.

Contents of delivery:
1. The dryer is assembled
2. A block of shelves
3. Trays for the product 3 pcs.
4. Vacuum pump (block of pumps)
5. Vacuum hose
6. Operating Instructions (the passport)
7. Package
8. VM-4 vacuum oil

Additional equipment with ASCI stainless steel product trays is possible 430.

Bulova Freeze dryer 12

Sublimation dryer Bulova 12 intended for industrial use.

The maximum weight of the loaded product 12 kg/cycle
Area of ​​trays: 10720 cm²
Volume of trays: 12860 cm³ Vacuum working depth 15-180 by
The temperature on the surface of the sublimator, max. minus -40°
Shelf temperature, max. + 60С°
Mass of accumulating ice 11 kg/cycle.
The number of shelves for raw materials - 8
Technological cycle time 24-48 hours
Power of all devices and units 4,5 kW/year., installed: 7.0 kW/year.
Supply voltage 380 volts with ground
Mass is no more 350 kg
Operating temperature 10° - 30°C
Maximum noise level 75 dB
Freon R-410a

Frame consists of several panels, from which the front and back walls are formed, cover and base. Made of thick sheet metal 0.8-1 mm and painted by the method of powder painting. The panels are connected to each other using screws
The Bulova 12A dryer is made of ASCI-304 stainless sheet metal..

Drying chamber is a hollow cylinder made of food grade stainless steel ASCI-304, equipped with organic glass front doors. A silicone seamless ring acts as a sealing element. A handle with a latch is installed on the door. Necessary nozzles and fasteners are welded to the cylinder.

Vacuum pump is an integral part, equipped with a 2-stage plate-rotor pump. Works under absolute pressure 15 by.

 

Bulova Freeze dryer 100

Sublimation dryer Bulova 100 intended for industrial use.

The maximum weight of the loaded product 100 kg/cycle
Area of ​​trays: 10 m²
The temperature on the surface of the sublimator, max. minus -40°
Shelf temperature, max. + 60С°
Mass of accumulating ice 150 kg/cycle.
The number of shelves for raw materials - 10
Technological cycle time 24-48 hours
Power of all devices and units 14,0 kW/year., installed: 19.0 kW/year.
Supply voltage 380 volts with ground
Mass is no more 1450 kg
Operating temperature 10° - 30°C
Maximum noise level 75 dB
Freon R-410a

Frame self-supporting structure of a tunnel-type freezer with two oppositely located doors. Monoblock construction: camera + refrigeration unit + hinged system of the board. All nodes and aggregates are placed in one case. Made of ASCI-304 grade stainless steel sheet metal 0.8-1 mm.

Drying chamber is a hollow self-supporting structure made of food grade stainless steel ASCI-304, equipped with a front door with observation windows made of organic glass.

Vacuum pump is an integral part, a 2-stage plate-rotor pump is installed. Works under absolute pressure 15 by.

Transport dimensions
Number of cargo pieces: 3
1: 310/81/200 cm, 1350 kg
2: 100/50/50 cm, 80 kg
3: 120/50/120 cm, 8 kg

 

To buy a Bulova freeze dryer, ask for a price list.

models: Bulova 02, Bulova 12, Bulova 100, Bulova 300, Bulova 400.

The term of production of sublimation equipment with a capacity of 12 kg - from 20 days.